Design and Implementation of High-Precision Panel for Multichannel Micro-Flow Gas Monitoring in Oil Exploitation

Weilun Tang; Jian  Liu; Yangjie  Deng; Junli  Yi; Yuchen  Lu

doi:10.47540/ijias.v2i2.506

Authors

Weilun Tang School of Electrical and Information Engineering, Wuhan Institute of Technology, China
Jian Liu School of Electrical and Information Engineering, Wuhan Institute of Technology, China
Yangjie Deng School of Electrical and Information Engineering, Wuhan Institute of Technology, China
Junli Yi School of Electrical and Information Engineering, Wuhan Institute of Technology, China
Yuchen Lu School of Electrical and Information Engineering, Wuhan Institute of Technology, China

DOI:

https://doi.org/10.47540/ijias.v2i2.506

Keywords:

AD Sampling, Gas Flow Panel, STM32

Abstract

Gas leakage is a common occurrence in crude oil exploitation, and may cause devastating effects or at least put the health of workers at stake if not managed properly. To address this issue, a type of high-precision panel for multichannel micro-flow gas monitoring was proposed in this paper, which can be applied to a range of scenarios including the monitoring of gas leakage in oil exploitation. Different channels for gas-flow sensors are provided on the panel, to monitor the gas flow in multiple places at the same time. The menu is enhanced with a multilevel design, which makes it possible for the functions to be customized. The research method of this paper followed these procedures: First, hardware design was illustrated. Next, the software solution was specified in the paper. Finally, based on theoretical analysis, laboratory experiments were successfully carried out, which demonstrated that the performance of this design was in line with our scheme. Overall, this design can help conduct early warning in the case of gas leakage and remind the operators to take timely response, which can significantly ensure the safety of crude oil exploitation.

References

Baron, C., Jean-Claude Geffroy, & G Motet. (2011). Embedded system applications. Springer.

Biantoro, A. W. (2020). GLEDS (Gas Leakage Early Detection System) Prototype for Early Detection of Gas Leaks Based on Microcontroller on Motor Vehicles. Jurnal Teknik Mesin, 9(1), 1.

Chen, J., Zhang, K., Wang, L., & Yang, M. (2020). Design of a High Precision Ultrasonic Gas Flowmeter. Sensors, 20(17), 4804.

Duren, R. M., & Miller, C. E. (2011). Towards robust global greenhouse gas monitoring. Greenhouse Gas Measurement and Management, 1(2), 80-84.

Fuller, S. H., & Gatherer, A. (2005). RapidIO: the embedded system interconnect. Wiley.

Gallagher, J. E. (2006). Natural gas measurement handbook. Gulf Pub.

Johannes Fink. (2021). Petroleum Engineer’s Guide to Oil Field Chemicals and Fluids. Gulf Publishing Company.

Kernighan, B. W., & Ritchie, D. M. (2015). The C programming language. Pearson.

Lim, J.-S. (2016). Design of High Speed Data Acquisition and Fusion System with STM32 Processor. Journal of the Korea Convergence Society, 7(1), 9–15.

Miller, L. H., & Quilici, A. E. (1987). C programming language: an applied perspective. John Wiley & Sons, Cop.

Morris, J. M., & Xin, Y. (2012). Results on Gas Detection and Concentration Estimation Via Mid-IR-Based Gas Detection System Analysis Model. IEEE Sensors Journal, 12(7), 2347–2354.

Rigelsford, J. (2001). Smart mass gas flow sensor. Sensor Review, 21(3).

Sestoft, P., & Niels Hallenberg. (2017). Programming language concepts. Springer.

Spilsbury, R. (2014). The oil industry. Wayland.

Xu, W., Zhang, T., Bi, Y., Liu, W., & Xin, L. (2014). Analysis the compressibility impact of gas on vortex flowmeter measurement performance. Journal of Electronic Measurement and Instrument, 27(9), 797–802.