Pengenalan Aplikasi Pengecoran Logam Berbahan Dasar Sampah Kemasan Kaleng Untuk Pembuatan Produk Wajan Bagi Masyarakat Kota Kendari

Authors

  • Budiman Sudia Program Studi Teknik Mesin, Universitas Halu Oleo, Indonesia
  • Aminur Program Studi Teknik Mesin, Universitas Halu Oleo, Indonesia
  • Raden Rinova Sisworo Program Studi Teknik Mesin, Universitas Halu Oleo, Indonesia
  • Ridway Balaka Program Studi Teknik Mesin, Universitas Halu Oleo, Indonesia
  • Citra Yurnidarsyah Program Studi Teknik Mesin, Universitas Halu Oleo, Indonesia
  • Sudarsono Program Studi Teknik Mesin, Universitas Halu Oleo, Indonesia
  • Samhuddin Program Studi Teknik Mesin, Universitas Halu Oleo, Indonesia
  • La Hasanudin Program Studi Teknik Mesin, Universitas Halu Oleo, Indonesia

DOI:

https://doi.org/10.47540/ijcs.v1i1.534

Abstract

One of the classic problems that are difficult to overcome in urban life is environmental problems where waste is not handled properly, especially inorganic waste. Currently, the largest contributor to waste after organic waste is inorganic waste in the form of canned waste. The use of aluminum as a packaging material is due to its being lightweight, easy to shape, and does not endanger human health. On that basis, its use as packaging is widespread which also triggers the forerunner of the waste problem in people's lives. Aluminum waste will be a source of income for the community if it is handled properly by involving waste processing technology in the form of recycling technology through metal smelting or casting. This service program aims to introduce metal casting applications made from canned waste into frying pan products for the community in Lepo-Lepo, Kendari City. The activity stages include: socializing the introduction of aluminum-based cans of packaging waste and the practice of smelting aluminum cans in a crucible furnace and pouring molten metal into molds. The implementation of this service activity can raise awareness of participants to be able to process waste, especially aluminum can packaging into frying pan products, and create new jobs to improve the welfare of the local community.

References

Aminur, A., Kadir, K., Hasbi, M., Sudarsono, S., Gunawan, Y., Hasanudin, L., Imran, A. I. (2020). Rancang Bangun dan Uji Coba Tungku Krusibl Dari Tabung Gas Bekas Dengan Menggunakan Sumber Panas Gas LPG (Vol. 6). Indramayu, Jawa Barat, Indonesia: JTT (Jurnal Teknologi Terapan) Politeknik Negeri Indramayu.

Badan Pusat Statistik Kota, K. (2018). Kecamatan Baruga Dalam Angka 2018. Kendari: Baruga Subsdistrict in Figures BPS-Statistics of Kendari Municipality.

Baqiroh, N. F. A. B. (2019). Timbunan Sampah Nasional Capai 64 Juta Ton Per Tahun, Jakarta: Ekonomi Bisnis.com.

Dewilda, Y. & Julianto, J. (2019). Kajian Timbunan, Komposisi, dan Potensi Daur Ulang Sampah Sebagai dasar Perencanaan Pengelolaan Sampah Kawasan Kampus Universitas Putra Indonesia (UPI). Padang, Prosiding Seminar Nasional Pembangunan Wilayah dan Kota Berkelanjutan, pp. 142-151.

Dun, G. W. & Robert, P. H. (2007). Perry's Chemical Engineer's Handbook. Eighth ed. New York: McGraw-Hill.

Eko, S. (2002). Pemberdayaan Masyarakat Desa, Samarinda: Badan Diklat Provinsi Kaltim.

Manurung, M. & Ayuningtyas, F. I. (2010). Kandungan Aluminium Dalam Kaleng Bekas dan Pemanfaatannya Dalam Pembuatan Tawas. Jurnal Kimia, 4(2), pp. 180-186.

McMarkum. (2015). Limbah Kaleng dan Pemanfaatan Limbah, s.l.: http://mfarofi.blogspot.com.

Published

2022-05-15

How to Cite

Sudia, B. ., Aminur, Sisworo, R. R. ., Balaka, R. ., Yurnidarsyah, C. ., Sudarsono, Samhuddin, & La Hasanudin. (2022). Pengenalan Aplikasi Pengecoran Logam Berbahan Dasar Sampah Kemasan Kaleng Untuk Pembuatan Produk Wajan Bagi Masyarakat Kota Kendari. Indonesian Journal of Community Services, 1(1), 6-11. https://doi.org/10.47540/ijcs.v1i1.534

Issue

Section

Articles